Q1: Hello fellow dishcloths*!
-
Hello all. What have I been doing this week? I've been so busy I can't remember...
I baked a cake or two, did more clearing out of stuff, and did a lot of peopling. It's been fun, but I'd like to stop for a bit please.
@suearcher @MakersHour Sounds busy! I have had to stop … never easy for me!
-
@MakersHour A1 Hello
old friends, new friends and dishcloths. I have been busy this week but not with craft. I have, though, been learning to draw which is fun! I’m also a bit under the weather so I’m trying to take it easy. #MakersHour@Janet_52square @MakersHour I've never managed to stick at learning to draw, so am living vicariously through you lately. Hope you feel better soon!
-
Q1: Hello fellow dishcloths*! Tell us what you’ve been doing this week.
*The new term of endearment for us all.
https://cupoftea.social/@MakersHour/116257639087292428Q1: Hello fellow dishcloths*! Tell us what you’ve been doing this week.
A1: Hello! Two things last weekend! Look at me doing stuff!
Andy (@Andy@tenforward.social)
Attached: 2 images Finally got round to sorting out the stand for the railway clock I made. Not exactly how I planned it, but it works. You can’t see most of it anyway! #MakersHour #woodwork #metalwork #railway
Ten Forward (tenforward.social)
Andy (@Andy@tenforward.social)
Attached: 4 images Worked on another railway signal lamp today. This one is dated 1942 and is taller and wider than the others I have. It’s unusual too as it has a square carousel holding the coloured glass. Others have a round carousel. It was mainly a clean up job with some polishing of the brass bits, some soldering to repair part of the carousel and some rust treatment. Oh, I also replaced the orange glass as it had a chunk missing. I happened to have some orange glass in my spares box, so I just had to cut that down by about 5mm. #MakersHour #restoration #railway
Ten Forward (tenforward.social)
-
@grajohnt @MakersHour semi-random is cool. I am on mostly-random but hoping to reduce randomness shortly…
@Janet_52square @MakersHour I have that ambition, but as it's 3pm here (but normally 2pm because were in the 'twilight zone' between time changes), it's always a busy time.
Plans always spoil my good intentions.
-
A1 Been working mostly on fixing the plumbing for the makerspace. By refactoring the existing plumbing, I've managed to make space for a sink for a new pottery area.
@quixoticgeek @MakersHour pottery peeps will love the sink!! Pretty much essential for them.
-
@MakersHour hello #MakersHour! Another semi-random afternoon appearance for me.
A1: This week, I've been making a new PCB design for #emfcamp, which I have finalized and sent off for fab along with a couple other boards I'm reordering.
And lots of other making projects that are creaking along. Hopefully some will move faster now that this task is cleared.
It's a ticking clock here to do outside projects before it gets scorching hot.
@grajohnt
Oh those designs look really good. -
Hello all. What have I been doing this week? I've been so busy I can't remember...
I baked a cake or two, did more clearing out of stuff, and did a lot of peopling. It's been fun, but I'd like to stop for a bit please.
@suearcher @MakersHour Ugh, peopling! Sounds like you both deserve a break tbh
-
@suearcher @MakersHour Sounds busy! I have had to stop … never easy for me!
Yeah, enforced stopping isn't so much fun. I hope you feel better soon.
But hey - you have walls!
-
@MakersHour hello #MakersHour! Another semi-random afternoon appearance for me.
A1: This week, I've been making a new PCB design for #emfcamp, which I have finalized and sent off for fab along with a couple other boards I'm reordering.
And lots of other making projects that are creaking along. Hopefully some will move faster now that this task is cleared.
It's a ticking clock here to do outside projects before it gets scorching hot.
@MakersHour and a huge thanks to @jarkman for the inspiration on the silkscreen graphics, so I could get the board to the point where I could convince myself to order it.
-
Q1: Hello fellow dishcloths*! Tell us what you’ve been doing this week.
*The new term of endearment for us all.
https://cupoftea.social/@MakersHour/116257639087292428@MakersHour hi, Maaike here. This week I've been doing largely the same as last week: stitching on my biro shirt for the 100 day project, knitting a sock (still the same sock). I also did a little weaving project for my textile art challenge, and some light embroidery.
By the way, in Dutch there's an expression 'weak as a dishcloth' for feeling under the weather, so this seems like a very appropriate term of endearment for some makers this week
I hope you all feel better soon!
#MakersHour -
@quixoticgeek @MakersHour pottery peeps will love the sink!! Pretty much essential for them.
@Janet_52square @MakersHour Yep, we're looking forward to the improvement in capabilities. This weekend I need to build the settling tank to go under the sink.
-
Q1: Hello fellow dishcloths*! Tell us what you’ve been doing this week.
A1: Hello! Two things last weekend! Look at me doing stuff!
Andy (@Andy@tenforward.social)
Attached: 2 images Finally got round to sorting out the stand for the railway clock I made. Not exactly how I planned it, but it works. You can’t see most of it anyway! #MakersHour #woodwork #metalwork #railway
Ten Forward (tenforward.social)
Andy (@Andy@tenforward.social)
Attached: 4 images Worked on another railway signal lamp today. This one is dated 1942 and is taller and wider than the others I have. It’s unusual too as it has a square carousel holding the coloured glass. Others have a round carousel. It was mainly a clean up job with some polishing of the brass bits, some soldering to repair part of the carousel and some rust treatment. Oh, I also replaced the orange glass as it had a chunk missing. I happened to have some orange glass in my spares box, so I just had to cut that down by about 5mm. #MakersHour #restoration #railway
Ten Forward (tenforward.social)
@Andy @MakersHour this is lovely - it suits the clock really well.
-
Q1: Hello fellow dishcloths*! Tell us what you’ve been doing this week.
A1: Hello! Two things last weekend! Look at me doing stuff!
Andy (@Andy@tenforward.social)
Attached: 2 images Finally got round to sorting out the stand for the railway clock I made. Not exactly how I planned it, but it works. You can’t see most of it anyway! #MakersHour #woodwork #metalwork #railway
Ten Forward (tenforward.social)
Andy (@Andy@tenforward.social)
Attached: 4 images Worked on another railway signal lamp today. This one is dated 1942 and is taller and wider than the others I have. It’s unusual too as it has a square carousel holding the coloured glass. Others have a round carousel. It was mainly a clean up job with some polishing of the brass bits, some soldering to repair part of the carousel and some rust treatment. Oh, I also replaced the orange glass as it had a chunk missing. I happened to have some orange glass in my spares box, so I just had to cut that down by about 5mm. #MakersHour #restoration #railway
Ten Forward (tenforward.social)
-
Q1: Hello fellow dishcloths*! Tell us what you’ve been doing this week.
A1: Hello! Two things last weekend! Look at me doing stuff!
Andy (@Andy@tenforward.social)
Attached: 2 images Finally got round to sorting out the stand for the railway clock I made. Not exactly how I planned it, but it works. You can’t see most of it anyway! #MakersHour #woodwork #metalwork #railway
Ten Forward (tenforward.social)
Andy (@Andy@tenforward.social)
Attached: 4 images Worked on another railway signal lamp today. This one is dated 1942 and is taller and wider than the others I have. It’s unusual too as it has a square carousel holding the coloured glass. Others have a round carousel. It was mainly a clean up job with some polishing of the brass bits, some soldering to repair part of the carousel and some rust treatment. Oh, I also replaced the orange glass as it had a chunk missing. I happened to have some orange glass in my spares box, so I just had to cut that down by about 5mm. #MakersHour #restoration #railway
Ten Forward (tenforward.social)
@Andy @MakersHour Love these!
-
@suearcher @MakersHour Ugh, peopling! Sounds like you both deserve a break tbh
The peopling was all pleasant, I must add. Just a lot of it.
Nothing much planned for the weekend, so hopefully we'll just get on with clearing, and have a bit of down time.
-
Diolch cariad.
-
Yeah, enforced stopping isn't so much fun. I hope you feel better soon.
But hey - you have walls!
@suearcher @MakersHour Walls are underrated. So many people just lean on them or take them for granted. Not round here, we celebrate them!
-
@MakersHour hi, Maaike here. This week I've been doing largely the same as last week: stitching on my biro shirt for the 100 day project, knitting a sock (still the same sock). I also did a little weaving project for my textile art challenge, and some light embroidery.
By the way, in Dutch there's an expression 'weak as a dishcloth' for feeling under the weather, so this seems like a very appropriate term of endearment for some makers this week
I hope you all feel better soon!
#MakersHour@Stratski
I have heard that socks take a lot of work and effort, so not surprised you are still on the same sock. -
@MakersHour hi, Maaike here. This week I've been doing largely the same as last week: stitching on my biro shirt for the 100 day project, knitting a sock (still the same sock). I also did a little weaving project for my textile art challenge, and some light embroidery.
By the way, in Dutch there's an expression 'weak as a dishcloth' for feeling under the weather, so this seems like a very appropriate term of endearment for some makers this week
I hope you all feel better soon!
#MakersHour@Stratski @MakersHour oh that’s a nice expression. That’s me tonight.
-
@suearcher @MakersHour Walls are underrated. So many people just lean on them or take them for granted. Not round here, we celebrate them!
When shall we have International Celebrate Your Walls day?
