Unlike my floppy drive box, only a single goat has pissed on my PCjr box
-
@gloriouscow i don't believe i've ever seen a PCjr cartridge in my life, not even online. i think i searched to see what they look like and got no results
@mjdxp@labyrinth.zone @gloriouscow@oldbytes.space i wish my family had kept the pc jr we had when i was growing up
i think we had at least 3 cartridges for it: cartridge basic, electric desk (office suite), and a game that might have been crossfire
but we never used them because they were very limited/outdated compared to their disk counterparts. we had a ton of mostly pirated software on disk lol -
@gloriouscow that's the "manicure" slot. You can drop fingernail clippings in there, just like you would put razors in that slot in your medicine cabinet.
@rotopenguin oh so the T port is for toenails
-
@gloriouscow i don't believe i've ever seen a PCjr cartridge in my life, not even online. i think i searched to see what they look like and got no results
@mjdxp I can't wait to make PCjr cartridges with my OneROM
-
@mjdxp @gloriouscow honestly it's more comfortable and ergonomic than many significantly more modern controllers
@timixretroplays @gloriouscow i feel like that stick wouldn't last too long if you were too rough with one (which many 80's kids were) -
@gloriouscow i don't believe i've ever seen a PCjr cartridge in my life, not even online. i think i searched to see what they look like and got no results
-
Oh wait my bad we do need that, put that back.
The worst part of packing up to leave your hotel room is always putting your PCjr back together
-
@gloriouscow JJ's namesake is not hard to find in good condition, and often still BNIB! #retrocomputing
@timixretroplays @gloriouscow "I can't believe nobody bought this!" </aussie accent>
-
The D port is where you can connect a display. You can use a special cable to attach a normal CGA monitor. You can purchase such a cable for $20 from someone who got it from Computer Reset for $3
This is the PCjr CGA video cable.
-
This is the PCjr CGA video cable.
This one actually had the original box, but for the first time in my life, I told them not to even ship me the box. It was in that bad condition.
And given how I'm happy about my external Tandy drive box, that should tell you something.
-
This one actually had the original box, but for the first time in my life, I told them not to even ship me the box. It was in that bad condition.
And given how I'm happy about my external Tandy drive box, that should tell you something.
I joked about them being $20 but I see a listing for one for $90. The entire boxed PCjr I got was $150, for comparison.
-
This is the PCjr CGA video cable.
@gloriouscow wait, is that just a standard 0.100 female header connector? That's all?
-
@gloriouscow wait, is that just a standard 0.100 female header connector? That's all?
@petrillic All the PCjr IO is two big berg strips with some plastic spacers that key the connections one way. Remeber they were trying to make it as cheap as possible to manufacture.
-
This one actually had the original box, but for the first time in my life, I told them not to even ship me the box. It was in that bad condition.
And given how I'm happy about my external Tandy drive box, that should tell you something.
@gloriouscow I got rid of my Virtual Boy box for more space in my closet. I uhhh... regret that.
(To be clear, I got my VB for Christmas 2007. There just happened to be a local store with one in box.)
-
@gloriouscow I got rid of my Virtual Boy box for more space in my closet. I uhhh... regret that.
(To be clear, I got my VB for Christmas 2007. There just happened to be a local store with one in box.)
@cr1901 every other collector thanks you for making their boxes more valuable
-
@cr1901 every other collector thanks you for making their boxes more valuable
@gloriouscow At least I know I made a mistake and can learn from it. Consolation?
-
I joked about them being $20 but I see a listing for one for $90. The entire boxed PCjr I got was $150, for comparison.
If you're not familiar with the whole Computer Reset saga, check out LGR's videos:
https://www.youtube.com/watch?v=rvM82T3C2Ik
https://www.youtube.com/watch?v=K-ZZkZk9QRkBasically, a large warehouse full of 80's vintage hardware was discovered after the owner passed away and the family reached out for help.
-
If you're not familiar with the whole Computer Reset saga, check out LGR's videos:
https://www.youtube.com/watch?v=rvM82T3C2Ik
https://www.youtube.com/watch?v=K-ZZkZk9QRkBasically, a large warehouse full of 80's vintage hardware was discovered after the owner passed away and the family reached out for help.
Among the items were hundreds of PCjr related items, most still new in sealed boxes. These items have since flooded the secondary market.
-
Among the items were hundreds of PCjr related items, most still new in sealed boxes. These items have since flooded the secondary market.
Due to the scale of the clean-out, not everyone who arrived at the warehouse had purely charitable motives, and so you'll find people hawking NIB PCjr joysticks for way more than they should go for, because they walked out of the warehouse after paying pennies on the dollar for them.
(Note: LGR is not at fault in any way, and most of the people that showed up to help I'm sure had good intentions)
-
Due to the scale of the clean-out, not everyone who arrived at the warehouse had purely charitable motives, and so you'll find people hawking NIB PCjr joysticks for way more than they should go for, because they walked out of the warehouse after paying pennies on the dollar for them.
(Note: LGR is not at fault in any way, and most of the people that showed up to help I'm sure had good intentions)
If you're selling NIB PCjr CGA cables for $90 however, you need to be proverbially kicked in your D port.
-
@petrillic All the PCjr IO is two big berg strips with some plastic spacers that key the connections one way. Remeber they were trying to make it as cheap as possible to manufacture.
Secret shame: back in the 80's I bought the PCjr thermal printer because it was cheap and I thought I could interface it to my Tandy CoCo3. Never could get it to work, eventually trashed the printer.
I've thought about getting another one and trying again (I have much better understanding of the CoCo's quirks) but those printers did not age well.
But yes. That connector. Grr.
