Hey #miniaturepainting peeps
-
@madcollector holy shit I saw a video of Prince August in action and that thing is fucking noisy! The PA people call that sonoreuse but fk that, that'll drive you insane
@madcollector nope sparmax is better but doesn't seem to have a tank. What you'll ideally want is a 165 psi miniature compressor suitable for needles 0.2-1.0mm with tank. Idk, have your contacts got the Fengda AS-600 in store?
-
Hey #miniaturepainting peeps!
I may have a garage in my future. That means.... a compressor!
I have vouchers for a very few websites, and am limited to what they have in stock.What do you think of the Sparmax Arism AC66 HX?
Or Prince-August AC04?If it looks like this, it is worth spending money on. If it does not, it is not. This is as good as it gets, and a ton of brands sell this exact same compressor, all made by the same factories in China.
-
If it looks like this, it is worth spending money on. If it does not, it is not. This is as good as it gets, and a ton of brands sell this exact same compressor, all made by the same factories in China.
@madcollector look at ol' @NinjaDebugger saying in one (1) toot what took me 5
Although that net plug looks dangerous
-
If it looks like this, it is worth spending money on. If it does not, it is not. This is as good as it gets, and a ton of brands sell this exact same compressor, all made by the same factories in China.
@NinjaDebugger Thanks!
I'll pass and keep brushing then. Tankless is the only range si can get "for free" with my vouchers -
If it looks like this, it is worth spending money on. If it does not, it is not. This is as good as it gets, and a ton of brands sell this exact same compressor, all made by the same factories in China.
@NinjaDebugger oh wait, I used another keyword to look for online shops and it looks like I can get compressor just like the one you're recommending.
Is 4 bars and 1 cylinder enough, or should I aim for 6 bars and 2 cylinders? -
@NinjaDebugger oh wait, I used another keyword to look for online shops and it looks like I can get compressor just like the one you're recommending.
Is 4 bars and 1 cylinder enough, or should I aim for 6 bars and 2 cylinders?@madcollector @NinjaDebugger idk what you'd want with 2 cylinders TBF. You're not going to spray paint that much unless you plan on putting on a splitter and airbrushing with two people - and then I'd STILL expect you to be able to do give with one cylinder!
-
@madcollector @NinjaDebugger idk what you'd want with 2 cylinders TBF. You're not going to spray paint that much unless you plan on putting on a splitter and airbrushing with two people - and then I'd STILL expect you to be able to do give with one cylinder!
@erikcats One cylinder AF186 it is, then!
-
@erikcats One cylinder AF186 it is, then!
One cylinder is fine, what you lose out on is mostly endurance and steadiness, which isn't strictly necessary for most of what you'll be doing with an airbrush on miniatures. If you're going to go hardcore, you'll end up upgrading, most likely, but for your basic "I'm going to prime, zenithal, varnish, and basecoat with the airbrush" almost any compressor will do. I still use a cheap portable compressor from a cake decorating kit.
-
One cylinder is fine, what you lose out on is mostly endurance and steadiness, which isn't strictly necessary for most of what you'll be doing with an airbrush on miniatures. If you're going to go hardcore, you'll end up upgrading, most likely, but for your basic "I'm going to prime, zenithal, varnish, and basecoat with the airbrush" almost any compressor will do. I still use a cheap portable compressor from a cake decorating kit.
@NinjaDebugger @madcollector painting by airbrush with a pressure tank is a fkn upgrade I've made that was totes worth it. With a decent airbrush tool there's so much detail you can paint so fast!
-
@NinjaDebugger @madcollector painting by airbrush with a pressure tank is a fkn upgrade I've made that was totes worth it. With a decent airbrush tool there's so much detail you can paint so fast!
Believe me, I have considered getting one quite often, and it's sitting on my wishlist at a mere $85, but also I have just given up my painting room for Reasons(TM) and spent five months unemployed and IT WOULD BE REALLY NICE IF SHIT WOULD STOP HAPPENING FOR JUST A FEW GODDAMN DAYS.
-
R relay@relay.infosec.exchange shared this topic
