If you have strong opinions about #Mesh networking, please let me know.

[dan@mastodon.durrans.com]

@Edent For Meshcore in the UK you need to change your radio settings:

Frequency: 869.618
Bandwidth: 62.5
Spreading Factor: 8
Coding Rate: 8
Transmit Power: 22

[psfshr@mastodon.me.uk]

@Edent Before I dropped off, a large part of the UK moved to UK Narrow, so might be worth switching over

[dan@mastodon.durrans.com]

@Edent This is the EU/UK (Narrow) preset.

[edent@mastodon.social]

@edronik @thechaoszone I'll give it a go. Ta!

[edent@mastodon.social]

@dan @psfshr thanks - I'll make the switch now.

[m0yng@mastodon.radio]

@Edent UK/EU Narrow. The default is wrong

[dan@mastodon.durrans.com]

@Edent @psfshr Traffic on the Public channel can be sporadic. Last message was at 15.51 for me.

In the app click the vertial ... menu then tools then Discover Nearby Nodes then Discover Repeaters. This should find any local repeaters that can hear you (and then you hear them).

[edent@mastodon.social]

@M0YNG cheers. Have switched over. Nothing discovered yet.

[u0421793@toot.pikopublish.ing]

@dan @Edent what’s the thing you have to do to stop it from getting contacts in the contacts list, I keep forgetting, as it defaults to the opposite way everybody says to do it.

[m0yng@mastodon.radio]

@Edent not shocking. the repeaters are usually set to advertise with large gaps (I think 12 hours)

Put a ping out on the test channel (hashtag test) and check if "sent" changes to "heard 1 repeat". If so, one repeater heard you and you heard it repeat your message.
Try a couple of times if it didn't work immediately...

If not, try another position!

[dan@mastodon.durrans.com]

@u0421793 @Edent Settings (Cog) > Contact Settings.

This can stop your contacts list getting unmanageable.

[edent@mastodon.social]

@M0YNG thanks. Nothing yet. Trying a different window

[grutzifix@fedifreu.de]

@Edent

1. problem is the window
2. this type of antenna dont like to kink
3. antennas love metal-bases to reduce noise from electronics

[edent@mastodon.social]

@grutzifix ok. Where do you suggest I put it? Not sure how waterproof it is

[edent@mastodon.social]

Aha! I had to unbend the antenna
Now receiving #Meshcore messages. Don't know if any of mine are being seen though.

[dan@mastodon.durrans.com]

@Edent I haven't seen your messages (get to Bristol).

When you send a message do you see any repeats? Under your blue message bubble it may say something like “Heard 1 repeat”. If it just says "Sent" then it is possible no one heard you.

You may be able to hear things without anyone hearing you.

[an0key@chaos.social]

@Edent uk narrow

[edent@mastodon.social]

@dan not seeing any repeats so, yeah, I expect I'm on read only at the moment

[w8emv@a2mi.social]

@Edent oh, antennas and antenna placement can be very weird to understand and to debug. in general it's better to not have your whip antenna near to a big piece of metal because it will couple with it and throw everything off.

recommendation: take a photograph, measure for a day, move something around, take another photograph, do another day's measurements, repeat.

If you can get the antenna outside rather than inside it will make a difference, but that's not always easy

[tinheadned@dice.camp]

@Edent this doesn't help but I assumed Northampton wouldn't have any #meshtastic traffic and now I'm interested