CIRCLE WITH A DOT

@adam@adamm.cc Oh, several people in my building have similar things so i'm sure they're tested, but I definitely do want to know how it works.

@adam@adamm.cc I think they actually have a way to break into the boxes. I don't know exactly how that works, but that's kind of what I understood them to say.

I wanted to share with everyone a product that I just received that may be beneficial to others. After my fall on Saturday evening, the paramedics strongly recommended that I get myself a key lock box so that if anything like this happens again they'll be able to access a spare key. I found one that's completely accessible with push buttons and tactile markings that make it possible to set or change the combination whenever. This is the Master Lock 5422D push button portable key safe. The videos, at least on the Amazon Canada site were extremely helpful and gave me the information I needed to set it up and put it on my door. This hangs from the doorknob, so no screws have to be placed in the walls. Once you open the weather protector on the front you'll find a large button at the top which will slide down to open or close. At the bottom is another smaller slide switch which is your reset button. In the middle, of course, is a 12-button keypad, and all numbers and symbols can be used in your combination. When you first get the lock there's no combination entered, so push down on the slider at the top to open the lock. On the back of the place where the buttons are, you'll feel twelve little switches corresponding to each button on the keypad. If you feel closely, you'll find that there is a tactile arrow on each switch. They are all pointing upward. Take a small tool or flat-head screwdriver and fit it into each of the switches and turn it 180 degrees until the arrow points down. It takes a little bit of doing, but it will work. Do this for each number you want in your PIN. At the top on the inside of the compartment is a little switch. Slide this and pull up on the hasp at the top. This is where you'll attach it to your doorknob. Close the button panel and enter your PIN. This must be done to lock and unlock. After entering the numbers, (and you can do them in any order, so if your number is 1 2 3 4, you could enter 2 1 4 3. As long as all the numbers are entered it will open. If you enter the wrong number, clear it with the switch at the bottom and try again. Push down on the button used to open the box and the lid should snap into place. Close up the weather flap and it's set. Place the hasp over your doorknob and snap it into place, and you've got yourself a very sturdy lock box for a spare key or two. This is the basics, and I'm very happy with my purchase. The Amazon link is below, but to view it in your country, change the dot ca to dot com, dot co.uk, etc. Here's the link: https://www.amazon.ca/dp/B00BOSMLGS?smid=A3DWYIK6Y9EEQB&ref_=chk_typ_imgToDp&th=1