Remember, #sailing is funRemember, #sailing is funRemember, #sailing is funRemember, #sailing is fun
-
System shared this topic on
-
The tunnel is long, but there _is_ light #sailing
-
The tunnel is long, but there _is_ light #sailing
First i use a small paintroller and roll on acetone some 5-6 times. Then I use a dish brush dipped in acetone and go wild with it, perpendicular to my face. This goes on for a few minutes, while dipping in acetone in between. Then I use a strong paper towel soaked in acetone to wipe the surface smooth. I have used maybe 7-8 liters of acetone so far, and this is only in the small forward cabin, including hanging locker and head. Soon I can replace deck hardware and then start insulating and applying the vinyl mat.
-
First i use a small paintroller and roll on acetone some 5-6 times. Then I use a dish brush dipped in acetone and go wild with it, perpendicular to my face. This goes on for a few minutes, while dipping in acetone in between. Then I use a strong paper towel soaked in acetone to wipe the surface smooth. I have used maybe 7-8 liters of acetone so far, and this is only in the small forward cabin, including hanging locker and head. Soon I can replace deck hardware and then start insulating and applying the vinyl mat.
@harald i hope u have good respirator?
-
@harald i hope u have good respirator?
-
First i use a small paintroller and roll on acetone some 5-6 times. Then I use a dish brush dipped in acetone and go wild with it, perpendicular to my face. This goes on for a few minutes, while dipping in acetone in between. Then I use a strong paper towel soaked in acetone to wipe the surface smooth. I have used maybe 7-8 liters of acetone so far, and this is only in the small forward cabin, including hanging locker and head. Soon I can replace deck hardware and then start insulating and applying the vinyl mat.
CAD aka Cardboard Aided Design #sailing
-
CAD aka Cardboard Aided Design #sailing
I have a laminating plan. #sailing
-
I have a laminating plan. #sailing
I have this, but don't have the courage
-
I have this, but don't have the courage
@harald dont be scare't
-
@harald Vad brukar dom säga om segling. ”Det är reparationerna som är målet.” eller nåt sånt… 🤭
-
I have this, but don't have the courage
To quote Mads on Sail Life; after some glorious sanding and a bit of thickened epoxy, tabbing was done. The laminate is really stiff and light, 10 mm of reused PET bottles as core material. Epoxy.
-
To quote Mads on Sail Life; after some glorious sanding and a bit of thickened epoxy, tabbing was done. The laminate is really stiff and light, 10 mm of reused PET bottles as core material. Epoxy.
Some more holes made for different hoses. Lifted the throne on place to check hose clearances.
Cut new holes for the 1 1/2"/38 mm ID hoses, larger 64 mm this time so pulling them won't be the same pain as before. Also re-routed to go through the console. Also did new holes for flushing water in the main bulkhead (I have a separate freshwater bladder for flushing water, Swiss surplus from varusteleka). Will have to get a few 90⁰ bends to make it neat.
First layer of paint applied, epoxy which will be followed by Hempel's onepack enamel. Would like white, but pearly white will be good.
Will be followed by insulation and natural white vinyl.
Remember, #sailing is fun.
