When I was at school they taught us how to make circuit boards using Letraset, ultraviolet light and an acid bath.
-
When I was at school they taught us how to make circuit boards using Letraset, ultraviolet light and an acid bath. (It was completely weird and mysterious to me at the time, I had no concept of why anyone would want to do it). Making a single circuit board or a couple of copies.
I'm assuming nowerdays there's a way to do this more easily - either with some element of digital fabrication at home or sending off to a fab lab of some sort. I wouldn't know what to even search for - is this a thing?
#electronics@grahamdunning yep, printing single and doublesided PCBs has gotten easier, and you can get just a few printed too. My recommendation is to look at some videos on it, see what software they use. Like here: https://app.media.ccc.de/v/cosin2025-56360-pcb-ci-printed-circuit-b But uh, it's in German. Which software is used can be handy, and he shows where he prints his PCBs too.
-
When I was at school they taught us how to make circuit boards using Letraset, ultraviolet light and an acid bath. (It was completely weird and mysterious to me at the time, I had no concept of why anyone would want to do it). Making a single circuit board or a couple of copies.
I'm assuming nowerdays there's a way to do this more easily - either with some element of digital fabrication at home or sending off to a fab lab of some sort. I wouldn't know what to even search for - is this a thing?
#electronics@grahamdunning Not my practice, but as far as I understand, people tend to just order PCBs at specialized labs.
Some labs even populate the board for you, i.e. no need for hunting down parts or difficult soldering anymore. Also, the labs will have more choices of PCB material (think RF, or USB-C compatible stuff with a defined thickness), will do multi-layer boards and vias, print silk screen and solder resist, produce solder masks ...
A web search for "order pcb" brings up a few brand names.
-
When I was at school they taught us how to make circuit boards using Letraset, ultraviolet light and an acid bath. (It was completely weird and mysterious to me at the time, I had no concept of why anyone would want to do it). Making a single circuit board or a couple of copies.
I'm assuming nowerdays there's a way to do this more easily - either with some element of digital fabrication at home or sending off to a fab lab of some sort. I wouldn't know what to even search for - is this a thing?
#electronics@grahamdunning See https://jlcpcb.com/ for the high quality, low cost services available now. I've had a number of project designs made by them.
-
@grahamdunning See https://jlcpcb.com/ for the high quality, low cost services available now. I've had a number of project designs made by them.
@drfootleg @grahamdunning Here are my notes from the first time I, a complete novice, designed a PCB and had it built...
Arduino Uno Dual Merge MIDI “Shield” – Part 2
I've been meaning to have a try at PCB design for a while. I'd like to add it to the list of things I'm amateurly enthusiastically ignorant about. I've not seen anything like my Arduino Uno Dual Merge MIDI “Shield” available anywhere but it is built of individual designs I am very familiar with, so I…
Simple DIY Electronic Music Projects (diyelectromusic.com)
(these days I always use jlcpcb with most of the default settings)
Main tip - keeping everything within a 100x100mm 2-layer board means they are ridiculously cheap to get made!
-
When I was at school they taught us how to make circuit boards using Letraset, ultraviolet light and an acid bath. (It was completely weird and mysterious to me at the time, I had no concept of why anyone would want to do it). Making a single circuit board or a couple of copies.
I'm assuming nowerdays there's a way to do this more easily - either with some element of digital fabrication at home or sending off to a fab lab of some sort. I wouldn't know what to even search for - is this a thing?
#electronicsfor home use, KiCAD is popular for schematic capture and PCB layout.
For fabrication, there are many vendors that will make PCBs and even populate them. JLBPCB and PCBWAY are two. You can also make two layer boards at home using a desktop CNC such as Carvera Air. And the old acid etch technique is still a low cost option.
-
@grahamdunning yep, printing single and doublesided PCBs has gotten easier, and you can get just a few printed too. My recommendation is to look at some videos on it, see what software they use. Like here: https://app.media.ccc.de/v/cosin2025-56360-pcb-ci-printed-circuit-b But uh, it's in German. Which software is used can be handy, and he shows where he prints his PCBs too.
@fnrd ace, thanks.
-
@grahamdunning Not my practice, but as far as I understand, people tend to just order PCBs at specialized labs.
Some labs even populate the board for you, i.e. no need for hunting down parts or difficult soldering anymore. Also, the labs will have more choices of PCB material (think RF, or USB-C compatible stuff with a defined thickness), will do multi-layer boards and vias, print silk screen and solder resist, produce solder masks ...
A web search for "order pcb" brings up a few brand names.
@seekraft Thanks - yes I was aware this sort of thing exits, but assumed for a single board it would be quite pricy.
-
@grahamdunning See https://jlcpcb.com/ for the high quality, low cost services available now. I've had a number of project designs made by them.
@drfootleg super, thanks.
-
@drfootleg @grahamdunning Here are my notes from the first time I, a complete novice, designed a PCB and had it built...
Arduino Uno Dual Merge MIDI “Shield” – Part 2
I've been meaning to have a try at PCB design for a while. I'd like to add it to the list of things I'm amateurly enthusiastically ignorant about. I've not seen anything like my Arduino Uno Dual Merge MIDI “Shield” available anywhere but it is built of individual designs I am very familiar with, so I…
Simple DIY Electronic Music Projects (diyelectromusic.com)
(these days I always use jlcpcb with most of the default settings)
Main tip - keeping everything within a 100x100mm 2-layer board means they are ridiculously cheap to get made!
@diyelectromusic that's really helpful, thanks.
-
for home use, KiCAD is popular for schematic capture and PCB layout.
For fabrication, there are many vendors that will make PCBs and even populate them. JLBPCB and PCBWAY are two. You can also make two layer boards at home using a desktop CNC such as Carvera Air. And the old acid etch technique is still a low cost option.
@rayk great, ta!
-
When I was at school they taught us how to make circuit boards using Letraset, ultraviolet light and an acid bath. (It was completely weird and mysterious to me at the time, I had no concept of why anyone would want to do it). Making a single circuit board or a couple of copies.
I'm assuming nowerdays there's a way to do this more easily - either with some element of digital fabrication at home or sending off to a fab lab of some sort. I wouldn't know what to even search for - is this a thing?
#electronics@grahamdunning If you’re in the EU, there’s also @aislerhq
https://aisler.net/ -
When I was at school they taught us how to make circuit boards using Letraset, ultraviolet light and an acid bath. (It was completely weird and mysterious to me at the time, I had no concept of why anyone would want to do it). Making a single circuit board or a couple of copies.
I'm assuming nowerdays there's a way to do this more easily - either with some element of digital fabrication at home or sending off to a fab lab of some sort. I wouldn't know what to even search for - is this a thing?
#electronics@grahamdunning It's now so cheap and fast to get boards made to ridiculously high standards that few people make their own. JLCPCB is one popular supplier
It is possible to etch boards with ferric chloride. Blank boards are available with photo resist, and the mask can be printed on a laser printer.
It's also possible to mill the copper from a circuit board using a CNC machine tool, which can be quite small if it's only got to take a sliver of copper from a fibreglass board.
-
@grahamdunning If you’re in the EU, there’s also @aislerhq
https://aisler.net/@Firesledge @aislerhq great, thanks.
-
@grahamdunning It's now so cheap and fast to get boards made to ridiculously high standards that few people make their own. JLCPCB is one popular supplier
It is possible to etch boards with ferric chloride. Blank boards are available with photo resist, and the mask can be printed on a laser printer.
It's also possible to mill the copper from a circuit board using a CNC machine tool, which can be quite small if it's only got to take a sliver of copper from a fibreglass board.
-
When I was at school they taught us how to make circuit boards using Letraset, ultraviolet light and an acid bath. (It was completely weird and mysterious to me at the time, I had no concept of why anyone would want to do it). Making a single circuit board or a couple of copies.
I'm assuming nowerdays there's a way to do this more easily - either with some element of digital fabrication at home or sending off to a fab lab of some sort. I wouldn't know what to even search for - is this a thing?
#electronics@grahamdunning We did the acid bath thing too my hazy recollection is that instead of letraset we had some kind of special paint pen to mask out the tracks.
-
When I was at school they taught us how to make circuit boards using Letraset, ultraviolet light and an acid bath. (It was completely weird and mysterious to me at the time, I had no concept of why anyone would want to do it). Making a single circuit board or a couple of copies.
I'm assuming nowerdays there's a way to do this more easily - either with some element of digital fabrication at home or sending off to a fab lab of some sort. I wouldn't know what to even search for - is this a thing?
#electronics@grahamdunning i've definitely seen people order custom circuit boards in ones / twos, so i know it's out there.
-
When I was at school they taught us how to make circuit boards using Letraset, ultraviolet light and an acid bath. (It was completely weird and mysterious to me at the time, I had no concept of why anyone would want to do it). Making a single circuit board or a couple of copies.
I'm assuming nowerdays there's a way to do this more easily - either with some element of digital fabrication at home or sending off to a fab lab of some sort. I wouldn't know what to even search for - is this a thing?
#electronics@grahamdunning gotta tag @xaxalxe as she makes her own (beautiful) custom PCBs, I'm sure she has a few things to add
(btw Lucía, cyber.nymph.garden seems to be down!) -
@grahamdunning gotta tag @xaxalxe as she makes her own (beautiful) custom PCBs, I'm sure she has a few things to add
(btw Lucía, cyber.nymph.garden seems to be down!)@yhancik oh thanks for telling me about my website, I'll check my server when I get back home !
-
@grahamdunning We did the acid bath thing too my hazy recollection is that instead of letraset we had some kind of special paint pen to mask out the tracks.
@sbszine ah nice!
The only other thing I remember from it was the technician telling us you could use the acid to burn your finger prints off if you wanted to commit some crimes. -
@yhancik oh thanks for telling me about my website, I'll check my server when I get back home !
