Finally got the stringer displacement piece assembled!!
-
Finally got the stringer displacement piece assembled!!
I forgot to take a picture before I started putting the clear bits on top, so imagine the first picture without those two square pieces.
Took the second at that weird angle so it is a little easier to see where the squares are on top. If all goes well, it should result in the stringers going all wavy.
The stringer displacement plate!! The bit on the upper right got a bit…folded for lack of a better description in firing, but it’s fine - my instructor thinks it will probably flatten back out in the slump fuse. If it doesn’t - interesting visual addition, LOL.
-
The stringer displacement plate!! The bit on the upper right got a bit…folded for lack of a better description in firing, but it’s fine - my instructor thinks it will probably flatten back out in the slump fuse. If it doesn’t - interesting visual addition, LOL.
@cafechatnoir Ohh, that is a really interesting pattern
-
@cafechatnoir Ohh, that is a really interesting pattern
Yeah, it came out so neat - and you can't quite see it in the picture, but the sparkles in the green really came through, too.
-
The stringer displacement plate!! The bit on the upper right got a bit…folded for lack of a better description in firing, but it’s fine - my instructor thinks it will probably flatten back out in the slump fuse. If it doesn’t - interesting visual addition, LOL.
@cafechatnoir Ooh, that looks very cool!
-
@cafechatnoir Ooh, that looks very cool!
Yeah, I think it's so neat, and the sparkle in the green shows up well in person.
-
The frit stretch project after another round in the kiln to get it a little thinner. It’s going to be slumped next into a bowl. Really love it so far!
My instructor was not kidding when she said she knew the perfect mold to use for this - it's exactly how I wanted it to look. Couldn't be happier with this one.
-
My instructor was not kidding when she said she knew the perfect mold to use for this - it's exactly how I wanted it to look. Couldn't be happier with this one.
@cafechatnoir that looks like it belongs in a mid century modern room
-
The stringer displacement plate!! The bit on the upper right got a bit…folded for lack of a better description in firing, but it’s fine - my instructor thinks it will probably flatten back out in the slump fuse. If it doesn’t - interesting visual addition, LOL.
The stringer displacement after the slump - came out really nice. The one corner where it was a little folded straightened out for the most part and I doubt I'll even notice it the next time I look at it.
-
@cafechatnoir that looks like it belongs in a mid century modern room
Sadly, it gets to live in my post-apocalyptic frat house aesthetic, LOL.
-
The stringer displacement after the slump - came out really nice. The one corner where it was a little folded straightened out for the most part and I doubt I'll even notice it the next time I look at it.
@cafechatnoir Gorgeous
️ -
My instructor was not kidding when she said she knew the perfect mold to use for this - it's exactly how I wanted it to look. Couldn't be happier with this one.
@cafechatnoir That is absolutely gorgeous!
-
@cafechatnoir Gorgeous
️I love how it came out! Can't wait to try it again with other colors and ribbons instead of the stringers.
-
@cafechatnoir That is absolutely gorgeous!
I don't think I could be happier with how it turned out - it's just perfect.
-
My instructor was not kidding when she said she knew the perfect mold to use for this - it's exactly how I wanted it to look. Couldn't be happier with this one.
@cafechatnoir @jeridansky Well done!
-
R relay@relay.mycrowd.ca shared this topic
-
My instructor was not kidding when she said she knew the perfect mold to use for this - it's exactly how I wanted it to look. Couldn't be happier with this one.
@cafechatnoir That is gorgeous!
-
The stringer displacement plate!! The bit on the upper right got a bit…folded for lack of a better description in firing, but it’s fine - my instructor thinks it will probably flatten back out in the slump fuse. If it doesn’t - interesting visual addition, LOL.
@cafechatnoir Are you going to the Vitrum studio?
-
My instructor was not kidding when she said she knew the perfect mold to use for this - it's exactly how I wanted it to look. Couldn't be happier with this one.
@cafechatnoir Beautiful! Live colours and form. Reminds me of Summertime at the ocean.
-
@cafechatnoir Are you going to the Vitrum studio?
No, I saw an ad for the class for the optic topics and just snagged the e-book for it. All my classes have been at the workhouse.
-
No, I saw an ad for the class for the optic topics and just snagged the e-book for it. All my classes have been at the workhouse.
@cafechatnoir Yes, the Vitrum books are amazing. Good call to pick them up.
-
R relay@relay.publicsquare.global shared this topic
