Has anyone on here played with pummer circuits?
-
@MLE_online @ai6yr Sounds like the charging side is working, at least. I bet the problem will be frustratingly simple.
-
-
@ai6yr @MLE_online Oh that’s interesting. I wonder if that’s a missing connection or if you’re acting like a capacitor.
-
@ai6yr @MLE_online Oh that’s interesting. I wonder if that’s a missing connection or if you’re acting like a capacitor.
@bytex64 @MLE_online Looks like you're going to have to put your finger on there all night LOL
(yes, that sounds right -- human capacitor!)
-
-
I have my doubts on that capacitor there. I have never seen one with the two colors... looks questionable to me.
Also, diodes are pretty heat sensitive, I used to destroy a lot of them by overheating them while soldering (until someone told me to use hemostats to heat sink between the diode and the solder).
Anyway, good luck! I'm sure the circuit works (if it's in MAKE), just something cross wired. If I get inspired I will try building one here, although I will have to poke around for a solar cell...
-
I have my doubts on that capacitor there. I have never seen one with the two colors... looks questionable to me.
Also, diodes are pretty heat sensitive, I used to destroy a lot of them by overheating them while soldering (until someone told me to use hemostats to heat sink between the diode and the solder).
Anyway, good luck! I'm sure the circuit works (if it's in MAKE), just something cross wired. If I get inspired I will try building one here, although I will have to poke around for a solar cell...
@MLE_online @bytex64 "Never decays" also would make me check R3, as that is what drains the LED charge to make it fade. Also R2 as it is draining charge off the timing capacitors...
R1 is just used to flip the pummer into "on" when the solar panel is off.
Ah heck, going to have to check it all anyway lol. Good luck.
-
Has anyone on here played with pummer circuits? If so, do you have any circuits you like?
(Please don't just send me links to pummer stuff online that you've never tried. I know how to use search engines)
@MLE_online If anyone else was just as confused as i regarding BEAM and pummers, here's a nice writeup:
https://sp4ee.github.io/build-log/fell-in-love-with-pummers/ -
@ai6yr it's not completely kaput. It does turn on when the lights go out. It just stays on instead of slowly pulsing. If i knew more about electronics, this would be an important clue
@ai6yr this second pummer was much easier to build because i did it deadbug style. Unfortunately it also doesn't work! In fact, it works even less than the last one
-
@ai6yr this second pummer was much easier to build because i did it deadbug style. Unfortunately it also doesn't work! In fact, it works even less than the last one
@MLE_online @ai6yr what's a pummer ? It looks interesting.
-
@MLE_online @ai6yr what's a pummer ? It looks interesting.
@quixoticgeek @MLE_online @ai6yr
I didn’t know and was curious.
This link is to a pdf of a Make Magazine article:
“Part robotic plant life, part techno-sculpture,
these desktop toys are easy and fun to make” -
@quixoticgeek @MLE_online @ai6yr
I didn’t know and was curious.
This link is to a pdf of a Make Magazine article:
“Part robotic plant life, part techno-sculpture,
these desktop toys are easy and fun to make”@stepheneb @MLE_online @ai6yr oh. It's beam robotics. Haven't seen that talked about in decades. Awesome.
-
@ai6yr this second pummer was much easier to build because i did it deadbug style. Unfortunately it also doesn't work! In fact, it works even less than the last one
@ai6yr fixed it!i had the diode the wrong way around
-
@ai6yr fixed it!i had the diode the wrong way around
@ai6yr Now that this works, I just need my ceramic luminary to come out of the kiln so I can install this in it
-
@ai6yr fixed it!i had the diode the wrong way around
@MLE_online @ai6yr Yeah, diodes are picky about that! Glad it's working.
-
@ai6yr Now that this works, I just need my ceramic luminary to come out of the kiln so I can install this in it
@ai6yr And now that I have one built. I think I can build a couple more -- if I can find more schottky diodes in my stuff. I was lucky to find one
-
@ai6yr fixed it!i had the diode the wrong way around
@MLE_online YAY! Glad you figured it out!!! That's fabulous!
-
@ai6yr this second pummer was much easier to build because i did it deadbug style. Unfortunately it also doesn't work! In fact, it works even less than the last one
@MLE_online I love that deadbug style makes it appear to be a spaceship, lol!
-
@ai6yr And now that I have one built. I think I can build a couple more -- if I can find more schottky diodes in my stuff. I was lucky to find one
@MLE_online I should just put a selection of stuff from my pile o'junk and send it your direction. I have the entire remainder of resistors from the unbuilt L1011 aircraft program, plus so many transistors in the garage, lol. You could undoubtedly use a bunch!
-
@MLE_online I love that deadbug style makes it appear to be a spaceship, lol!
@ai6yr that's in large part because i built it to be thin so i could fit it inside the ceramic piece, but there must also just be something inherently spacey about these because people like to make them look like little satellites
-
R relay@relay.mycrowd.ca shared this topic
