Unlike my floppy drive box, only a single goat has pissed on my PCjr box
-
Look right in here. Right up in this connector that can make your terrible wireless keyboard a terrible wired keyboard
@gloriouscow I tried to make my pcjr keyboard wired, using the cable. But it turns out the protocol is deeply stupid so I never got it working
-
The PCjr has lots of ports. But not really. They have two very large ports and plastic spacers.
The most important port on the IBM PCjr is the LP port, which is for the light pen.
From left to right, we have the joystick ports, J J, after which JJ Abrams was named.
Nobody knows what the L port is for. If you hook a speaker to it, sometimes you hear voices in forgotten languages.
The K port is for the keyboard.
The T port is where you connect a better computer, your Tandy 1000
-
The most important port on the IBM PCjr is the LP port, which is for the light pen.
From left to right, we have the joystick ports, J J, after which JJ Abrams was named.
Nobody knows what the L port is for. If you hook a speaker to it, sometimes you hear voices in forgotten languages.
The K port is for the keyboard.
The T port is where you connect a better computer, your Tandy 1000
@gloriouscow my favorite French anime, Jujutsu le Kaisen
-
The most important port on the IBM PCjr is the LP port, which is for the light pen.
From left to right, we have the joystick ports, J J, after which JJ Abrams was named.
Nobody knows what the L port is for. If you hook a speaker to it, sometimes you hear voices in forgotten languages.
The K port is for the keyboard.
The T port is where you connect a better computer, your Tandy 1000
A strange property of the gaping M port is that no light can escape it. This is normal.
The M port was for a modem but this was a stupid move on Ibm's part because the Internet hadn't been invented yet.
-
The most important port on the IBM PCjr is the LP port, which is for the light pen.
From left to right, we have the joystick ports, J J, after which JJ Abrams was named.
Nobody knows what the L port is for. If you hook a speaker to it, sometimes you hear voices in forgotten languages.
The K port is for the keyboard.
The T port is where you connect a better computer, your Tandy 1000
@gloriouscow JJ's namesake is not hard to find in good condition, and often still BNIB! #retrocomputing
-
A strange property of the gaping M port is that no light can escape it. This is normal.
The M port was for a modem but this was a stupid move on Ibm's part because the Internet hadn't been invented yet.
The D port is where you can connect a display. You can use a special cable to attach a normal CGA monitor. You can purchase such a cable for $20 from someone who got it from Computer Reset for $3
-
The D port is where you can connect a display. You can use a special cable to attach a normal CGA monitor. You can purchase such a cable for $20 from someone who got it from Computer Reset for $3
@gloriouscow I wish I knew why I was spending so much time and money trying to save my flood victim PCjr
-
A strange property of the gaping M port is that no light can escape it. This is normal.
The M port was for a modem but this was a stupid move on Ibm's part because the Internet hadn't been invented yet.
@gloriouscow that's the "manicure" slot. You can drop fingernail clippings in there, just like you would put razors in that slot in your medicine cabinet.
-
The D port is where you can connect a display. You can use a special cable to attach a normal CGA monitor. You can purchase such a cable for $20 from someone who got it from Computer Reset for $3
The most famous orifices on the PCjr though have to be the cartridge slots. They're a pair of dust magnets located directly under the floppy drive.
Inserting a cartridge into one of these will immediately reboot the system without confirmation. Be sure to do that while Daddy is working on a spreadsheet.
-
The most important port on the IBM PCjr is the LP port, which is for the light pen.
From left to right, we have the joystick ports, J J, after which JJ Abrams was named.
Nobody knows what the L port is for. If you hook a speaker to it, sometimes you hear voices in forgotten languages.
The K port is for the keyboard.
The T port is where you connect a better computer, your Tandy 1000
@gloriouscow LP is where the gas is filled
-
The most famous orifices on the PCjr though have to be the cartridge slots. They're a pair of dust magnets located directly under the floppy drive.
Inserting a cartridge into one of these will immediately reboot the system without confirmation. Be sure to do that while Daddy is working on a spreadsheet.
@gloriouscow Thank you for the memories
-
The most famous orifices on the PCjr though have to be the cartridge slots. They're a pair of dust magnets located directly under the floppy drive.
Inserting a cartridge into one of these will immediately reboot the system without confirmation. Be sure to do that while Daddy is working on a spreadsheet.
The first thing a new PCjr owner is going to want to do is remove the frungus modulator. You don't need this, it was only added for compliance with French law
-
The first thing a new PCjr owner is going to want to do is remove the frungus modulator. You don't need this, it was only added for compliance with French law
Oh wait my bad we do need that, put that back.
-
The first thing a new PCjr owner is going to want to do is remove the frungus modulator. You don't need this, it was only added for compliance with French law
@gloriouscow
I may be way overthinking things here. But reading between the lines I almost suspect you may not be 100% satisfied with the design decisions and manufacturing execution of this piece of hardware. -
@gloriouscow
I may be way overthinking things here. But reading between the lines I almost suspect you may not be 100% satisfied with the design decisions and manufacturing execution of this piece of hardware.@jannem I don't know what you're talking about. The peanut is the best thing people with MBAs ever forced engineers to make
-
Oh wait my bad we do need that, put that back.
@gloriouscow This thread on the Tandy 900 is amazing!
-
The most famous orifices on the PCjr though have to be the cartridge slots. They're a pair of dust magnets located directly under the floppy drive.
Inserting a cartridge into one of these will immediately reboot the system without confirmation. Be sure to do that while Daddy is working on a spreadsheet.
@gloriouscow i don't believe i've ever seen a PCjr cartridge in my life, not even online. i think i searched to see what they look like and got no results -
The first thing a new PCjr owner is going to want to do is remove the frungus modulator. You don't need this, it was only added for compliance with French law
@gloriouscow nah, the first thing a PCjr owner is going to end up doing is ordering a replacement keyboard (assuming they got the chiclet style one)
and the second thing they're going to do is order a tandy 1000 -
Here are the two IR Leds and the jack for connecting a keyboard cable. Let us look closer
@gloriouscow ah, that's right, IBM really did think they could pull off a wireless keyboard in the 80's -
Look right in here. Right up in this connector that can make your terrible wireless keyboard a terrible wired keyboard
@gloriouscow or you could plug a phone handset into there to presumably talk to your keyboard!
