<![CDATA[Now that the Mars Trek is out of the way, I have finally time to play some workshop rearranging tetris and get the 3D printing corner in order.]]>Now that the Mars Trek is out of the way, I have finally time to play some workshop rearranging tetris and get the 3D printing corner in order.

Here's the current setup:

- Snapmaker A350 with dual extruder mod
- Prusa MK4S with MMU3
- Prusa Mini+
- Flsun S1

A lot gets done in this part of the shop!

]]>https://board.circlewithadot.net/topic/e497047d-f4f0-42a9-845b-27d9246d5908/now-that-the-mars-trek-is-out-of-the-way-i-have-finally-time-to-play-some-workshop-rearranging-tetris-and-get-the-3d-printing-corner-in-order.RSS for NodeFri, 15 May 2026 05:59:44 GMTThu, 23 Apr 2026 19:59:58 GMT60<![CDATA[Reply to Now that the Mars Trek is out of the way, I have finally time to play some workshop rearranging tetris and get the 3D printing corner in order. on Thu, 23 Apr 2026 20:15:38 GMT]]>One of the major things I've been wanting to do is to turn this general junk pile shelf into a 3D printing material storage. I originally planted the Prusa Mini there and it fit there like a glove.

There's however several things I could see improved here and this was a good spot to do some upgrades.

The shelf is probably from the late 70s, so it's heavy and sturdy as hell, but I printed 4 brackets out of PA and bolted the shelf onto the brick wall with them. It was already stable, now it's really, REALLY stable!

Link Preview Image
]]>https://board.circlewithadot.net/post/https://some.apz.fi/ap/users/116031887511783990/statuses/116455855756903359https://board.circlewithadot.net/post/https://some.apz.fi/ap/users/116031887511783990/statuses/116455855756903359Thu, 23 Apr 2026 20:15:38 GMT